Pacific G1/4 PETG Tube 5/8” (16mm) OD Adapter – Black
Pacific G1/4 PETG Tube 5/8” (16mm) OD Adapter – BlackcxPacific G1/4 PETG Tube 5/8” (16mm) OD Adapter – Black

Pacific G1/4 PETG Tube 5/8” (16mm) OD Adapter – Black

$7.99

The Thermaltake Pacific Series Fittings provide a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4” durable copper fittings, finished in black coatings, take every detail seriously. Only compatible with PETG Tube 5/8” (16mm) OD to make your system a showcase for all to see with high quality components from Thermaltake.

Out of stock

SKU: CL-W064-CU16BL-A Categories: , ,

Product Description

Thermaltake Pacific G1/4 PETG Tube 5/8” (16mm) OD Adapter – Black

 

The Thermaltake Pacific Series Fittings provide a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4” durable copper fittings, finished in black coatings, take every detail seriously. Only compatible with PETG Tube 5/8” (16mm) OD to make your system a showcase for all to see with high quality components from Thermaltake.
“Tt LCS Certified” is the hallmark that ensures first-class performance from the best features and fitment. A certification exclusive to Thermaltake, it sets the benchmark for all true LCS chassis and is applied only to products that meet our stringent design standards for delivering what hardcore enthusiasts demand. The Tt LCS certification is a way for Thermaltake to designate to all power users the chassis which have been tested for best compatibility with extreme liquid cooling configurations.

High-flow and Leak-free Design

Made in Taiwan, the fittings allow proper connection to G1/4” ports, securing properly to cooling components while providing an even seal around the tubing. The fittings are available in chrome and black finishes, including 2 inner and 1 outer preinstalled O-rings. Use rigid tubing for all your water cooling needs.

For rigid tubing: Outer diameter: 5/8” (16 mm)

Remarkable Expansion

 

Thermaltake offers a full line of Pacific Series components for enthusiasts to build up aesthetically-superior water cooling systems by incorporating externally-modular upgrades for their chassis.
Cautions:

Thermaltake recommends the following steps to be taken after completing your water loop setup

  1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  4. Fill the reservoir to the top as it will prevent air from going into the pump
  5. If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  6. Place some paper towels under fittings and joining points to test for leaks.
  7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
  8. Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  9. Coolant might fade over time.

Additional Information

Weight 0.2 lbs
Dimensions 1 x 1 x 0.5 in

Reviews

There are no reviews yet.

Be the first to review “Pacific G1/4 PETG Tube 5/8” (16mm) OD Adapter – Black”