Thermaltake V-Tubler PETG Tube 12mm OD 10mm ID 1000mm 4 Pack
CL-W142-PL12TR-A_11de5fb37a6345dabdc11769c21cf003Thermaltake V-Tubler PETG Tube 12mm OD 10mm ID 500mm 4 PackThermaltake V-Tubler PETG Tube 12mm OD 10mm ID 1000mm 4 Pack

Thermaltake V-Tubler PETG Tube 12mm OD 10mm ID 1000mm 4 Pack

$14.99

Thermaltake introduces the V-Tubler PETG solid tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with 12mm OD PETG tube adapter fittings, it gives users better mounting, easier fitting, and ideal flow to make your system a showcase for all to see.

In stock

Product Description

Thermaltake V-Tubler PETG Tube 12mm OD 10mm ID 1000mm 4 Pack
Thermaltake introduces the V-Tubler PETG solid tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with 12mm OD PETG tube adapter fittings, it gives users better mounting, easier fitting, and ideal flow to make your system a showcase for all to see.

Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.

100% PETG Material
100% PETG Material Made in Taiwan, the V-Tubler PETG Tube is constructed from superior PETG material which is reliable, non-toxic, and substance free. Thicker walls ensure safe operation, enabling the users to make the straightest run as well as tightest bends without the need of excessive compression fittings and 90 degree angle rotaries. Working temperature ranges from -4℉ (-20℃) to 143.6℉ (62℃).
– Outer Diameter: 12 mm
– Inner Diameter: 10 mm
– Length: 1000mm*4

Remarkable Expansion
Designed for use with 12mm OD PETG tube adapter fittings, V-Tubler PETG Tube is pre cut into retail coils of four 1000mm lengths, allowing enthusiasts to build up aesthetically-superior water cooling systems by allocating the radiators to each particular component and incorporating externally-modular upgrades for their chassis.

Specification:

Material PETG
Inside Diameter 10 mm
Outside Diameter 12 mm
Length 1000 mm *4
Color Transparent

* Specifications are subject to change without notice.
* The product picture(s) is only for your reference, it may differ from the actual product.

 

Caution

Thermaltake recommends the following steps to be taken after completing your water loop setup

  1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  4. Fill the reservoir to the top as it will prevent air from going into the pump
  5. If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  6. Place some paper towels under fittings and joining points to test for leaks.
  7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
  8. Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  9. Coolant might fade over time.

Additional Information

Weight 2 lbs
Dimensions 35 x 5 x 5 in

Reviews

There are no reviews yet.

Be the first to review “Thermaltake V-Tubler PETG Tube 12mm OD 10mm ID 1000mm 4 Pack”