View Cart “TT Premium Concentrate – Black (4-Pack)” has been added to your cart.
P1000 Pastel Coolant - Blue
Thermaltake P1000 Pastel CoolantThermaltake P1000 Pastel Coolant - RedThermaltake P1000 Pastel Coolant

P1000 Pastel Coolant – Blue

$39.99

Thermaltake P1000 Pastel Coolant Series is designed with TT latest formula to be used as anti-corrosion protection fluid and heat-transfer medium for PC water-cooling. With the new liquid surface tension optimizer added to the formula, P1000 Pastel Coolant Series has minimized the risk of airlock and made filling up your system easy! The new formula also provides P1000 Pastel Series with color saturation and stability, as well as low viscosity that enables effective flow. Thermaltake P1000 Pastel Coolant Series is formulated to impress and simplify the process of setting up your water loop!

In stock

SKU: CL-W246-OS00BU-A Category: Tag:

Product Description

Better Formula, For a Better System
Filling Coolant made Easy!

Thermaltake has made filling coolant easy. Thanks to the TT exclusive formula, the old days of repeatedly unplugging the system or waiting for 12 to 24 hours for the air to clear out after filling the loop is behind us. P1000 Pastel Coolant Series has minimized the risk of airlock by adding liquid surface tension optimizer. With P1000, it only takes about 5 to 10 seconds to start the system after filling the loop

Specification:

P/N CL-W246-OS00BU-A
Capacity 1000 ml
Color Blue
Hazardous component 1,2-Propanediol< 6%
CAS 57-55-6
EC 200-338-0

* Specifications are subject to change without notice.
* The product picture(s) is only for your reference, it may differ from the actual product.

Caution

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  1. To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  2. Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  3. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake P1000 and T1000 Series. It offers great performance while protecting the entire liquid loop from corrosion.
  4. Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake P1000 and T1000 Series. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  4. Fill the reservoir to the top as it will prevent air from going into the pump
  5. If necessary, tilt the system slightly from side to side to clear the air out of the loop.
  6. Place some paper towels under fittings and joining points to test for leaks.
  7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
  8. Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  9. Please be advised that the color of coolant may change over time once you start to run the coolant in your system.
  10. Thermaltake recommends replacing coolant every 6 months.
  11. Please Do Not mix Thermaltake coolant with non-Thermaltake coolant or liquid.

Additional Information

Weight 3 lbs
Dimensions 6 x 6 x 12 in

Reviews

There are no reviews yet.

Be the first to review “P1000 Pastel Coolant – Blue”