View Cart “Pacific T11 Reservoir” has been added to your cart.
Pacific C360 DDC Soft Tube Water Cooling Kit
CL-W253-CU12SW-A_f40f417007df4de6a84099f868df03e6Thermaltake Pacific C360 DDC Hard Tube Water Cooling KitCL-W242-CU12SW-A_5d447b555dad48549d15c6ff6299ec47Pacific C240 DDC Hard Tube Water Cooling KitCL-W242-CU12SW-A_4fb0dc2bcca04c05a1b80f735b3b2c12CL-W249-CU12SW-A_3af59d26771a422b8fdf43a9c7c4acbf_thumPacific C240 DDC Hard Tube Water Cooling KitPacific C360 DDC Soft Tube Water Cooling Kit

Pacific C360 DDC Soft Tube Water Cooling Kit

$299.99

Thermaltake Pacific C360 DDC Soft Tube Water Cooling Kit is designed for users who likes an efficient and high-quality combo kit that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI and AsRock. The kit includes three Pure 12 ARGB Sync Radiator Fans, a Pacific W4 ARGB CPU Water Block, Pacific PR15-DDC Pump/Reservoir Combo, Pacific C360 Radiator, A bottle of T1000 Transparent Coolant Pure Clear, six Pacific 1/2” ID x 3/4” OD Compressions, two meters of V-tubler 4T 1/2’‘(12.7mm) ID x 3/4’‘(19mm) OD Transparent Tube, an ARGB LED controller, and other accessories.

In stock

Product Description

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AsRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and AsRock official websites.

DownloadRGB_SupportList

*Caution: the motherboard signal connector only supports 5V header.

Specification:

P/N CL-W253-CU12SW-A
Dimension 520 (L) x 200 (W) x 232 (H)
Compatibility Intel LGA 2066/2011/1366/1156/1155/1151/1150/775
AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
(CPU Socket)
Components Dimension Pump & Reservoir: 86.54 (L) x 62 (W) x 140.1 (H) mm
Copper Radiator : 29.5 (H) x 119 (W) x 399 (L) mm
Tube Dimension OD : 16mm , ID : 12mm
Fan Spec PWM 500~1500 RPM ,
( ARGB Controller or 5V MB ARGB Sync )
Coolant T1000 Coolant Pure Clear
Kit Contents CPU Water Block
– Pacific W4 ARGB CPU Water Block x1Pump/Reservoir
– Pacific PR15-DDC Pump/Reservoir Combo x1Copper Radiator
– Pacific C360 Radiator 29.5 (H) x 119 (W) x 399 (L) mm x1ARGB Fan
– Pure 12 ARGB Sync Radiator Fan TT Premium Edition x3
– ARGB LED ControllerFittings
– Pacific 1/2” ID x 3/4” OD Compression – Black x6
– Pacific G1/4 90 Degree Adapter – Black x2Coolant
– Thermaltake T1000 Coolant Pure Clear x1Tube
– V-tubler 4T 1/2’‘(12.7mm) ID x 3/4’‘(19mm) OD
Transparent Tube x2 MetersAccessory
– Intel and AMD Universal Backplated & Mounting Kit
– 24pin ATX Bridge Tool x1
– Thermaltake Thermal Grease x1

* Specifications are subject to change without notice.
* The product picture(s) is only for your reference, it may differ from the actual product.

Caution

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  1. To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  2. Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  3. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  4. Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  4. Fill the reservoir to the top as it will prevent air from going into the pump
  5. If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  6. Place some paper towels under fittings and joining points to test for leaks.
  7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
  8. Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  9. Coolant might fade over time.

Additional Information

Weight 12.3 lbs
Dimensions 21 x 16 x 9.5 in

Reviews

There are no reviews yet.

Be the first to review “Pacific C360 DDC Soft Tube Water Cooling Kit”